Failed activation solution for GardePro cellular trail camera Pre-installed SIM card

This article is about troubleshooting activation failure of the cellular trail camera with a pre-installed SIM card. If you’re unsure how to identify your camera model, this article can provide more information: How to tell if your cellular Trail camera model

Principle: You need to understand that the activation failure of your camera may be due to the current carrier of the cellular SIM card in your camera being incorrect, and therefore, you need to switch to an appropriate carrier for your camera. Click here to learn more about Global 4G LTE cellular networks corresponding to SIM mode IR.

1. Check the camera model

First, you need to select the correct content based on the region applicable to your camera model (if your camera model does not match the region you are using it in, please contact GardePro customer service). Click “How to check camera model” to learn more:

• Model: If the suffix is “DUS/DXA,” it is applicable to the USA and Canada regions. Please read about the solution for activation failure of the cellular trail camera with a pre-installed SIM card in the USA and Canada regions.
• Model: If the suffix is “DEU/DXE,” it is applicable to the European and Australian regions. Read about the solution for activation failure of the cellular trail camera with a pre-installed SIM card in the European and Australian regions.

2. Solution for activation failure of the cellular trail camera with a pre-installed SIM card in the USA and Canada regions:

Determine if the camera module supports switching carriers directly in the camera.

Enter the camera menu, click “Cellular info” to check your camera module. 

a. If your camera module ends with 004.

If your camera module ends with 004, as shown in the image, it does not support switching carriers in the camera.Therefore, you need to remove the SIM card and manually switch to the correct carrier on a phone. For specific steps, please browse—How to switch to the correct IMSI on a phone.

How to switch to the correct IMSI on a phone:

IOS IMSI switching process: “Settings” — “Cellular” — “SIM Applications” — “Multi IMSI” — “Select Mode” — “Manual” — select the appropriate carrier.

Android IMSI switching process: “SIM Services” — “Multi IMSI” — “Select Mode” — “Manual” — select the appropriate carrier.

b. If your camera module ends with 009.

If your camera module ends with 009, as shown in the image, you need to check if your camera version is above V6.2.97. If so, you can switch IMSI directly in the camera. If your version is below V6.2.97, please upgrade your camera version. Click “version” to check your current camera version. For upgrading instructions, click “How to upgrade.” For specific steps, please browse—How to switch to the correct IMSI in the camera.

How to switch to the correct IMSI in the camera:

 “Advanced Settings” — “SIM Settings” — “Muti IMSI” — “Select Mode” — “Manualatic” — select the appropriate carrier.

3. Solution for activation failure of the cellular trail camera with a pre-installed SIM card in the European and Australian regions:

Determine if the camera module supports switching carriers directly in the camera. Enter the camera menu, click “cellular info” to check your camera module.

a. If your camera module starts with EG915UEABR 02

If your camera module starts with EG915UEABR 02, as shown in the image, it does not support switching carriers in the camera. Therefore, you need to remove the SIM card and manually switch to the correct carrier on a phone. For specific steps, please browse—How to switch to the correct IMSI on a phone.

How to switch to the correct IMSI on a phone:

IOS IMSI switching process: “Settings” — “Cellular” — “SIM Applications” — “Multi IMSI” — “Select Mode” — “Manual” — select the appropriate carrier.

Android IMSI switching process: “SIM Services” — “Multi IMSI” — “Select Mode” — “Manual” — select the appropriate carrier.

b. If your camera module ends with EG915UEABR 03

If your camera module ends with EG915UEABR 03, as shown in the image, you need to check if your camera version is above V6.2.95. If so, you can switch IMSI directly in the camera. If your version is below V6.2.95, please upgrade your camera version. Click “version” to check your current camera version. For upgrading instructions, click “How to upgrade.” For specific steps, please browse—How to switch to the correct IMSI in the camera.

How to switch to the correct IMSI in the camera:

“Advanced Settings” — “SIM Settings” — “Muti IMSI” — “Select Mode” — “Manualatic” — select the appropriate carrier.

If your problem still cannot be solved, please contact us.