How to Quickly Activate Your WiFi Camera?

This guide explains how to quickly activate and connect your GardePro WiFi camera using the GardePro Mobile app.

The GardePro E9 is used as an example in this guide. The activation process is similar for other GardePro WiFi camera models, although the camera interface may vary slightly.

Getting Ready:

• Download the GardePro mobile app: Search on Google Play or Apple App Store.

• Set up account: Choose your region, create an account and log in. 

Activation Steps:

1. Ready to start:

• Install 8 AA batteries and memory card.

• Then tighten the antenna.

• Remove the protective film.

2. Turn on the power and enable the WiFi network:

• Slide the on/off button to activate the camera.

• Go to "WiFi" in the menu and enable it.

3. Turn on the phone's Bluetooth.

4. Turn off VPN and ad-blocking apps on your phone.

• Make sure the ad blocking and VPN on your phone are turned off. If there is a VPN connection, delete it. The following video demonstrates how to delete a VPN connection (only applicable to Android devices).

5. Connect the camera using the mobile app:

• Open the GardePro mobile app.

• Choose Add " WIFI Camera".

• Wait for the camera's wifi signal to appear in the list.

6. Confirm connection:

• Wait for the camera to connect successfully, then click "Start".

• If the waiting bar at the top is green, it means the connection is successful.

7. Test and use:

• Find "Format SD card" and complete the formatting.

• Click on "Camera" to enter the live stream function page.

• Adjust the camera to the right angle and wait for the picture to appear.

• Click to take a photo, check the "Gallery" and confirm the successful upload of the picture.

Now you can use the GardePro E9 trail camera.

For more information, please visit GardePro's support page.

If your problem still cannot be solved, please contact us.